Your current location: Home > News
Method for the use of glass glue
Class:News Date:2013-6-11 10:21:00
Clearance of the joint surface moisture, grease, dust and other pollutants, the appropriate solvents may be used, such as xylene, methyl ethyl ketone, clean surface, and then a clean cloth to wipe all residues and the fully clean, dry.
Cover the surface near the interface with plastic tape. In order to ensure the sealing of the working lines are perfect and tidy.
Open hose nozzle mounted on the nose tube, then in the 45 degree angle cut according to the size of filling.
Caulking gun mount, keep 45 degrees along the gap pressure of the rubber glue, to ensure close contact with the surface of the substrate. When the joint width greater than 15 mm, to repeatedly glue. After the glue cutter for finishing the surface, remove excess glue, then the adhesive tape is torn off, if there are stains, can use wet cloth to remove. Glass glue
Sealant in room temperature for 10 minutes after sulfuration fully sulfided for 24 hours or longer, varied according to coating thickness and ambient temperature and humidity.