Your current location: Home > News
Plastic glass steps and standards
Class:News Date:2015-2-11 10:26:43
First point: The first thing you'll want to use the glue gun;
The second point: Make sure your sealant width is the width of the gap;
The third point: According to your gluing gap width than the nozzle to cut the gap I left caliber;
The fourth point: do the protection work on both sides sparred glue gap, the gap on both sides of the glass, profiles, stone above paste 2-3CM section of tape on both sides of the glass, profiles, stone and other play a protective role, but also amendments to the gap inside the glue is very convenient place;
Fifth: master of speed glue gun and glue the speed of movement, according to the depth of the gap uniform movement glue gun;
Sixth: gluing dressing area, looking for a blade Calibrating the uneven places, when there is no sparring glue into place to fill the gap glue;
Seventh point: so after 48 hours of tape on both sides of the material after yer to complete construction.
Previous: Neutral silicone sealant weaknesses?