Your current location: Home > News
ow to make a plastic sealed plastic watertight?
Class:News Date:2016-4-21 10:44:15
The method is: divided into two coating process on a plastic seam. First, according to conventional gluing method seaming. After the first curing adhesive, a resort, and the shape of the first plastic trim on top of a convex arcuate cross-section, so that it is wider than the first rubber, so that the second track on both sides of the bonding glue at the seams both sides of the glass surface.
This form of gluing both to expand the width of the adhesive surface and the seal, and it helps slow the local stress (especially in the cross interface), while covering the first sealant defect may occur during construction. In favor of the complete elimination of leakage risk.